Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 0.03" ID, 0.16" OD, 0.062" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 0.03" ID, 0.16" OD, 0.062" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain 082 C-Flex TPE Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 50 Foot Coil, 1/EA
Saint Gobain 082 C-Flex TPE Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 50 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) C-FLEX TUBING 1/4INX3/8IN 50FT
NC2955104 C-FLEX TUBING 1/4INX3/8IN 50FT
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 2-Stop, Peroxide-Cured Silicone, 1.14 mm ID; 6/PK
Appearance: Opaque Temperature: -70 to 52¿C Life at 100 rpm: 1000 hrs The first of a series of two-stop extension tubing options is below under Accessories. See all of our two-stop extension tubing formulations or contact our Application Specialists for personal assistance.
Cole-Parmer Food, Milk, and Dairy Tubing, 1/2" ID x 5/8" OD; 50 Ft
Food, Milk, and Dairy Tubing is non-toxic, taste-free and odor-free, and meets all applicable regulatory standards for use in food, dairy and milk applications. Producers of food, milk and dairy products require the dependable performance of this tubing in countless filling, draining, transfer and processing applications. Smooth, non-porous and flexible, the Food, Milk, and Dairy tubing promotes a sanitary fluid path by maintaining an interior free of trapped particles, and minimizing potential for bacterial growth. In addition, it is resistant to harsh alkaline cleaners and is not affected by most commonly used sanitizers.
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 6.35mm (1/4") ID X 11.11mm (7/16") OD, 50 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.
Grainger Dust Hose No of Pieces 1
The Makita Dust Hose is designed for use with the Makita 14U130 and 14U129 dust extractors. It measures 35 feet long and has an inside diameter of 1-1/4 inches. The hose is made from flexible PVC for durability and has steel wire reinforcement. It features quick connect ends for easy attachment and removal from the dust extractor. The hose is ideal for woodworking, demolition, and concrete applications where dust extraction is needed. It allows the user to extract dust efficiently over longer distances.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.14MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.14 mm ID; 12/PK, Avantor